Henry HillDesign Build RenovateCall (314) 280-8020

Egress Windows in Creve Coeur, Missouri

Many Creve Coeur basements have only small hopper windows high on the wall. They do not meet egress size, and they barely light the room. Replacing one with a full egress casement changes both safety and how the space feels.

Section drawing through a two-story walkout home showing the parts of a house Henry Hill remodelsone contract, footing to ridgeAS-1Basement finishingBS-2KitchensCS-3BathroomsDS-4Decks & porchesES-5AdditionsFS-6Paint, floors & trimGS-7Siding, windows & doors
Service
Egress Windows
Community
Creve Coeur, St. Louis County
From Wentzville
About 38 min
Division
Basements

Creve Coeur homes and this kind of project

An egress window in Creve Coeur means working in mid-century ranches alongside new infill homes, so on our first visit we look at the outside of the wall for gas, electric, AC lines and downspout drains, and the framing load above.

The housing stock here: mid-century ranches and split-levels on large lots, 1970s and 1980s two-stories, and new infill homes.

Block foundations, common in this period, need a lintel and careful grouting at the cut.

Foundations and basements in Creve Coeur

Ranch basements are large because the footprint is. Older ones need moisture evaluation, and old tile and duct wrap should be tested before removal.

Basements under the 1950s to 1970s homes of Creve Coeur are usually dry and full height, and many were finished decades ago with paneling, acoustic tile and nine-inch floor tile. Those materials need testing before they are disturbed. Once cleared, the big ranch footprints give generous lower levels.

What is included

On Creve Coeur jobs we restore the yard as we go: sod or seed and straw over disturbed areas, and spoils hauled off rather than left in a pile behind the garage.

We take on egress window work in and around neighborhoods off Ladue, Olive and Mason roads.

What we watch for

Heavy clay around Creve Coeur foundations means a well with no drain will fill like a bucket. We will not install one without a path for the water.

Creve Coeur properties tend to be large, level lots, and that affects how we stage materials, where an excavator, a concrete cutter and carpenters park and how debris leaves the site.

Permits and approvals in Creve Coeur

In Creve Coeur, an egress window is reviewed by the City of Creve Coeur building division. What follows is a building inspection of the opening, header and well.

Since this work shows from outside, also plan on city zoning on lot coverage and setbacks. We prepare that submittal alongside the permit.

Schedule and getting to you

Most Creve Coeur clients see two to four working days on site of construction for an egress window.

Creve Coeur sits toward the edge of our range: I-64 to I-270 north, under forty minutes outside rush hour. We group trade visits and deliveries carefully for projects at that distance, and we take them on when the scope justifies a dedicated crew.

What moves the price in Creve Coeur

We price egress windows in Creve Coeur from a site visit, not a square-foot figure. These are the items that change the number.

  • Drain connection method.
  • Depth of the dig and what is in the way outside: AC units, decks, gas meters.

More detail

Our step-by-step method for this work, and the factors that move its price, are laid out on the main egress windows page. More about the area is on our Creve Coeur page.

Egress Windows in Creve Coeur: common questions

How long does an egress window take in Creve Coeur?

Two to four working days on site once the permit is issued and locates are marked, plus interior trim. For Creve Coeur we group trade visits to keep that schedule tight despite the drive.

Do I need approval beyond a permit for an egress window in Creve Coeur?

Possibly. In Creve Coeur you may be dealing with city zoning on lot coverage and setbacks. City or county approval and private approval are separate, and we prepare both submittals and wait for written approval before ordering materials.

Casement or slider?

Casements give the most clear opening for a given frame size, so they usually let you cut a smaller hole.

Tell us about the project

Call (314) 280-8020 during working hours, Monday to Friday, 9am to 5pm, or send the form and we will call you back. The first visit is a walkthrough and a conversation, and it costs nothing.

Call (314) 280-8020Request estimate